点击放大
Yacht Lines 3D Concrete Wall Tile for Entrance – LANDERY MOSAIC
Sleek yacht hull lines. Interior / exterior walls.
| Material | Reinforced Fine Composite Concrete (UHPC) |
|---|---|
| Weight | 1.6 kg/pc · 22.2 kg/m² |
| Surface | Sleek yacht hull lines |
| Application | Interior / exterior walls |
| Collection | Classic Collection 2025 |
100+ custom colours in stock. Send a RAL, Pantone or NCS reference for colour matching.
Price on request — quantity, finish and destination determine the quote.
Product Description
Yacht Lines 3D Concrete Wall Tile for Entrance — a 30 mm relief tile in 120 × 600 mm modules, 13.9 pcs/m² coverage, 22.2 kg/m² installed. Cast in reinforced fine composite concrete and rated for interior and exterior walls, it ships factory-direct in 24 standard colours, with custom colour casting in 100+ chart shades (RAL / Pantone matching for trade projects). Free samples available.
Project gallery
Long, low hull lines give the Yacht Lines 3D concrete wall tile an unmistakably horizontal calm. Carved into 120 × 600 mm planks and 30 mm deep, the sweeping bands turn a wall into a set of parallel ridges that lengthen a room. Yacht Lines is a linear pattern built to stretch a space rather than fill it. Run end to end, the planks keep their alignment, so the wall reads as a single continuous gesture.
Design & Applications
The strong horizontal direction makes this tile ideal for entrances and corridors, where it visually widens a narrow plan. It also suits reception walls and long interior runs that benefit from a sense of speed and flow. For contrast in the same scheme, the Wave Grid 3D wall tile offers a curved counterpart to the straight hull lines.
- Entrance halls and reception walls
- Corridors and lift lobbies
- Restaurant and hotel interior cladding
- Sheltered exterior entrance panels
Specifications
- Module size: 120 × 600 mm
- Thickness: 30 mm
- Coverage: 13.9 pcs/m²
- Weight: 1.6 kg/pc · 22.2 kg/m²
- Material: Reinforced Fine Composite Concrete (UHPC)
- Finish: Sleek yacht hull lines
- Application: Interior / exterior walls
Finishes & Ordering
Yacht Lines is produced in 24 standard colours and supplied factory-direct, so long runs can be ordered with tone matched across a whole elevation. Horizontal or vertical layout changes the reading of the room. Request a sample to see the sweep of the lines in person.
Custom Colours – Any Shade from Our Colour Chart
Every LANDERY MOSAIC design can be custom-cast in 100+ colours from our studio colour chart: warm neutrals, beige and terracotta (KT series), cool greys (KB), brick reds (KR), ochre yellows (KY), dusty and saturated blues (KS / KA), sage greens (KG), taupe browns (KZ) and burnt oranges (KO). For architects, interior designers and shopfitting teams we offer custom colour matching – send a RAL, Pantone or NCS reference (or a physical sample) and we will cast the Yacht Lines relief in your project colour. Made-to-order production keeps the same reinforced fine composite concrete body and the same relief depth in every shade, so a bespoke colour never compromises the tile.
Standard palette for Yacht Lines (5 finishes in stock) – and any shade from the charts above can be custom-cast:
Frequently Asked Questions
What size are Yacht Lines tiles and how many do I need per square metre?
Each tile in the Yacht Lines 3D Concrete Wall Tile range measures 120 × 600 mm and stands 30 mm proud of the wall. Coverage is 13.9 pcs/m², so a 10 m² feature wall needs about 139 tiles. Allow an extra 8–10% for cuts at corners, openings and the end of each run.
How heavy is Yacht Lines once it is on the wall?
One Yacht Lines tile weighs 1.6 kg and a finished square metre weighs 22.2 kg. That sits in the medium range: use a cement-based adhesive rated for the load and make sure the substrate is flat and firmly bonded, with any hollow plaster removed first.
Can Yacht Lines be used outdoors, in a bathroom or on a shower wall?
The Yacht Lines 3D Concrete Wall Tile is made from Reinforced Fine Composite Concrete (UHPC) and is rated for both interior and exterior walls. In bathrooms and other wet areas, tank the substrate and seal the joints behind the tile, and keep direct shower spray off the relief. For exposed facades, tell us the project location when you enquire so the fixing, sealing and freeze–thaw detail can be specified for that climate.
What colours does Yacht Lines come in, and can I order a sample first?
The Yacht Lines 3D Concrete Wall Tile is produced in 24 standard colours: 60T WHITE, 10C BEIGE, 5C GREY, 10C GREY, 30C GREY, 10T GREEN, 30C BEIGE, 30C BLUE, 10G PINK, 5G BRICK, ELEPHANT EAR, CAMEL, LOESS, REDDENED EARTH, MT-SILVER, MT-GOLD, MT-BROWN, MT-COFFEE, MT-BLACK, MT-GREEN, MT-FRUIT-GREEN, MT-WATER-BLUE, MT-D-BLUE and MT-WINE-RED. The same tone reads lighter or deeper depending on how the light rakes across the relief, so order a sample tile before committing to a full wall; samples ship from stock and can be ordered one colour at a time. Need a shade that is not on the list? See the Custom Colours section above – this design can be cast in 100+ chart shades or matched to your own reference.
Can I order Yacht Lines in a custom colour?
Yes. Beyond the standard palette, the Yacht Lines 3D Cement Wall Tile can be cast in any of the 100+ shades on the LANDERY colour chart – beige and terracotta (KT), grey (KB), brick red (KR), ochre yellow (KY), blue (KS / KA), green (KG), taupe (KZ) and orange (KO). For trade and project orders we also do custom color matching to RAL, Pantone or NCS codes – tell us the shade and quantity and we will confirm lead time and arrange a sample in that colour.
How is Yacht Lines installed, and how do I keep the pattern aligned?
Fix with a cement-based tile adhesive on a flat, primed substrate and press each tile firmly into the combed bed. Because the relief is 30 mm deep, set out a dry run first: the pattern only reads correctly when the modules line up, so work from a datum line and check level every few rows. Cut edges with a diamond blade.