点击放大
Undulating Weave 3D Cement Wall Tile for Living Room – LANDERY MOSAIC
Interwoven undulating relief. Interior / exterior walls.
| Material | Reinforced Fine Composite Concrete (UHPC) |
|---|---|
| Weight | 0.38 kg/pc · 16.3 kg/m² |
| Surface | Interwoven undulating relief |
| Application | Interior / exterior walls |
| Collection | New Collection 2026 |
100+ custom colours in stock. Send a RAL, Pantone or NCS reference for colour matching.
Price on request — quantity, finish and destination determine the quote.
Product Description
Undulating Weave 3D Cement Wall Tile for Living Room — a 10 mm relief tile in 260 × 225 mm modules, 43 pcs/m² coverage, 16.3 kg/m² installed. Cast in reinforced fine composite concrete and rated for interior and exterior walls, it ships factory-direct in 24 standard colours, with custom colour casting in 100+ chart shades (RAL / Pantone matching for trade projects). Free samples available.
The undulating weave in Trio is made of three interlocking planes that rise and fall through a 10 mm profile. Cast at 260 × 225 mm, each tile carries enough of the rhythm to hold several full waves, so the interwoven undulating relief stays continuous across a wall instead of resetting abruptly at every joint.
Design & Applications
Trio is slim and light at 0.38 kg per piece with 43 pcs/m², so it works on generous living room elevations as well as on narrower returns and recesses. The weave direction can be turned to follow the length of a room or to lift a low ceiling line. A striped flowing surface, Flowing Weave 3D wall tile, shares the same interwoven thinking on a larger module.
- Living room wall behind a sofa or media console
- Dining room wall behind a long table
- Hallway and landing walls between rooms
- Home office backdrop wall for video calls
Specifications
- Module size: 260 × 225 mm
- Thickness: 10 mm
- Coverage: 43 pcs/m²
- Weight: 0.38 kg/pc · 16.3 kg/m²
- Material: Reinforced Fine Composite Concrete (UHPC)
- Finish: Interwoven undulating relief
- Application: Interior / exterior walls
Finishes & Ordering
Trio is produced in 24 standard colours and supplied factory-direct, so a living room scheme can be matched against paint and flooring at source. Since the undulating weave is shallow, a mid or dark tone tends to reveal it most clearly. Ask for a Trio sample before confirming the wall layout.
Custom Colours – Any Shade from Our Colour Chart
Every LANDERY MOSAIC design can be custom-cast in 100+ colours from our studio colour chart: warm neutrals, beige and terracotta (KT series), cool greys (KB), brick reds (KR), ochre yellows (KY), dusty and saturated blues (KS / KA), sage greens (KG), taupe browns (KZ) and burnt oranges (KO). For architects, interior designers and shopfitting teams we offer custom colour matching – send a RAL, Pantone or NCS reference (or a physical sample) and we will cast the Undulating Weave relief in your project colour. Made-to-order production keeps the same reinforced fine composite concrete body and the same relief depth in every shade, so a bespoke colour never compromises the tile.
Standard palette for Undulating Weave (1 finishes in stock) – and any shade from the charts above can be custom-cast:
Frequently Asked Questions
What size are Undulating Weave tiles and how many do I need per square metre?
Each tile in the Undulating Weave 3D Cement Wall Tile range measures 260 × 225 mm and stands 10 mm proud of the wall. Coverage is 43 pcs/m², so a 10 m² feature wall needs about 430 tiles. Allow an extra 8–10% for cuts at corners, openings and the end of each run.
How heavy is Undulating Weave once it is on the wall?
One Undulating Weave tile weighs 0.38 kg and a finished square metre weighs 16.3 kg. That is a light wall load: plastered masonry, tile backer board and a braced stud wall all carry it with a cement-based adhesive, so no special reinforcement is normally needed.
Can Undulating Weave be used outdoors, in a bathroom or on a shower wall?
The Undulating Weave 3D Cement Wall Tile is made from Reinforced Fine Composite Concrete (UHPC) and is rated for both interior and exterior walls. In bathrooms and other wet areas, tank the substrate and seal the joints behind the tile, and keep direct shower spray off the relief. For exposed facades, tell us the project location when you enquire so the fixing, sealing and freeze–thaw detail can be specified for that climate.
What colours does Undulating Weave come in, and can I order a sample first?
The Undulating Weave 3D Cement Wall Tile is produced in 24 standard colours: 60T WHITE, 10C BEIGE, 5C GREY, 10C GREY, 30C GREY, 10T GREEN, 30C BEIGE, 30C BLUE, 10G PINK, 5G BRICK, ELEPHANT EAR, CAMEL, LOESS, REDDENED EARTH, MT-SILVER, MT-GOLD, MT-BROWN, MT-COFFEE, MT-BLACK, MT-GREEN, MT-FRUIT-GREEN, MT-WATER-BLUE, MT-D-BLUE and MT-WINE-RED. The same tone reads lighter or deeper depending on how the light rakes across the relief, so order a sample tile before committing to a full wall; samples ship from stock and can be ordered one colour at a time. Need a shade that is not on the list? See the Custom Colours section above – this design can be cast in 100+ chart shades or matched to your own reference.
Can I order Undulating Weave in a custom colour?
Yes. Beyond the standard palette, the Undulating Weave 3D Cement Wall Tile can be cast in any of the 100+ shades on the LANDERY colour chart – beige and terracotta (KT), grey (KB), brick red (KR), ochre yellow (KY), blue (KS / KA), green (KG), taupe (KZ) and orange (KO). For trade and project orders we also do custom color matching to RAL, Pantone or NCS codes – tell us the shade and quantity and we will confirm lead time and arrange a sample in that colour.
How is Undulating Weave installed, and how do I keep the pattern aligned?
Fix with a cement-based tile adhesive on a flat, primed substrate. The 10 mm relief is shallow enough to cut with a diamond blade and fit around sockets and openings, but set out a dry run first so the pattern lines up from the datum line.