点击放大
Honeycomb Dots 3D Concrete Wall Tile for Feature Wall – LANDERY MOSAIC
Honeycomb raised dots. Interior / exterior walls.
| Material | Reinforced Fine Composite Concrete (UHPC) |
|---|---|
| Weight | 20 kg/pc · 20 kg/m² |
| Surface | Honeycomb raised dots |
| Application | Interior / exterior walls |
| Collection | Classic Collection 2025 |
100+ custom colours in stock. Send a RAL, Pantone or NCS reference for colour matching.
Price on request — quantity, finish and destination determine the quote.
Product Description
Honeycomb Dots 3D Concrete Wall Tile for Feature Wall — a 20 mm relief tile in 1000 × 1000 mm modules, 1 pcs/m² coverage, 20 kg/m² installed. Cast in reinforced fine composite concrete and rated for interior and exterior walls, it ships factory-direct in 24 standard colours, with custom colour casting in 100+ chart shades (RAL / Pantone matching for trade projects). Free samples available.
Project gallery
Popwall is a single 1000 × 1000 mm panel carrying a field of raised honeycomb dots, so a whole square meter arrives as one piece. The honeycomb raised dots give a feature wall a crisp, cellular texture with almost no grout lines to interrupt the pattern.
Design & Applications
Because it is a meter-square panel, the honeycomb field reads as a continuous sheet rather than a mosaic, and installation is far quicker than small-format work. It is aimed at feature walls where a clean, uninterrupted surface matters. The dots sit at a consistent height, so the panel looks even under both daylight and artificial light, and its scale suits walls that are seen from a distance, where a small mosaic would simply disappear.
- Feature walls in living rooms and lobbies;
- Reception and boardroom back walls;
- Retail shopfront cladding;
- Restaurant and cafe interiors.
To extend the cellular language into smaller areas, the Tray 3D wall tile echoes the dotted rhythm at a much finer scale.
Specifications
- Module size: 1000 × 1000 mm
- Thickness: 20 mm
- Coverage: 1 pcs/m²
- Weight: 20 kg/pc · 20 kg/m²
- Material: Reinforced Fine Composite Concrete (UHPC)
- Finish: Honeycomb raised dots
- Application: Interior / exterior walls
Finishes & Ordering
Popwall is made factory-direct in 24 standard colours, so the honeycomb dots can be specified in pale, neutral or deep tones to suit a scheme. Request a sample of this honeycomb tile to assess the dot depth before ordering a full feature wall.
Custom Colours – Any Shade from Our Colour Chart
Every LANDERY MOSAIC design can be custom-cast in 100+ colours from our studio colour chart: warm neutrals, beige and terracotta (KT series), cool greys (KB), brick reds (KR), ochre yellows (KY), dusty and saturated blues (KS / KA), sage greens (KG), taupe browns (KZ) and burnt oranges (KO). For architects, interior designers and shopfitting teams we offer custom colour matching – send a RAL, Pantone or NCS reference (or a physical sample) and we will cast the Honeycomb Dots relief in your project colour. Made-to-order production keeps the same reinforced fine composite concrete body and the same relief depth in every shade, so a bespoke colour never compromises the tile.
Standard palette for Honeycomb Dots (5 finishes in stock) – and any shade from the charts above can be custom-cast:
Frequently Asked Questions
What size are Honeycomb Dots tiles and how many do I need per square metre?
Each tile in the Honeycomb Dots 3D Concrete Wall Tile range measures 1000 × 1000 mm and stands 20 mm proud of the wall. Coverage is 1 pcs/m², so a 10 m² feature wall needs about 10 tiles. Allow an extra 8–10% for cuts at corners, openings and the end of each run.
How heavy is Honeycomb Dots once it is on the wall?
One Honeycomb Dots tile weighs 20 kg and a finished square metre weighs 20 kg. That sits in the medium range: use a cement-based adhesive rated for the load and make sure the substrate is flat and firmly bonded, with any hollow plaster removed first.
Can Honeycomb Dots be used outdoors, in a bathroom or on a shower wall?
The Honeycomb Dots 3D Concrete Wall Tile is made from Reinforced Fine Composite Concrete (UHPC) and is rated for both interior and exterior walls. In bathrooms and other wet areas, tank the substrate and seal the joints behind the tile, and keep direct shower spray off the relief. For exposed facades, tell us the project location when you enquire so the fixing, sealing and freeze–thaw detail can be specified for that climate.
What colours does Honeycomb Dots come in, and can I order a sample first?
The Honeycomb Dots 3D Concrete Wall Tile is produced in 24 standard colours: 60T WHITE, 10C BEIGE, 5C GREY, 10C GREY, 30C GREY, 10T GREEN, 30C BEIGE, 30C BLUE, 10G PINK, 5G BRICK, ELEPHANT EAR, CAMEL, LOESS, REDDENED EARTH, MT-SILVER, MT-GOLD, MT-BROWN, MT-COFFEE, MT-BLACK, MT-GREEN, MT-FRUIT-GREEN, MT-WATER-BLUE, MT-D-BLUE and MT-WINE-RED. The same tone reads lighter or deeper depending on how the light rakes across the relief, so order a sample tile before committing to a full wall; samples ship from stock and can be ordered one colour at a time. Need a shade that is not on the list? See the Custom Colours section above – this design can be cast in 100+ chart shades or matched to your own reference.
Can I order Honeycomb Dots in a custom colour?
Yes. Beyond the standard palette, the Honeycomb Dots 3D Cement Wall Tile can be cast in any of the 100+ shades on the LANDERY colour chart – beige and terracotta (KT), grey (KB), brick red (KR), ochre yellow (KY), blue (KS / KA), green (KG), taupe (KZ) and orange (KO). For trade and project orders we also do custom color matching to RAL, Pantone or NCS codes – tell us the shade and quantity and we will confirm lead time and arrange a sample in that colour.
How is Honeycomb Dots installed, and how do I keep the pattern aligned?
Fix with a cement-based tile adhesive on a flat, primed substrate and press each tile firmly into the combed bed. Because the relief is 20 mm deep, set out a dry run first: the pattern only reads correctly when the modules line up, so work from a datum line and check level every few rows. Cut edges with a diamond blade.