点击放大
Metallic Lines 3D Cement Wall Tile for Entrance – LANDERY MOSAIC
Angular metallic lines. Interior / exterior walls.
| Material | Reinforced Fine Composite Concrete (UHPC) |
|---|---|
| Weight | 0.8 kg/pc · 26.6 kg/m² |
| Surface | Angular metallic lines |
| Application | Interior / exterior walls |
| Collection | New Collection 2026 |
100+ custom colours in stock. Send a RAL, Pantone or NCS reference for colour matching.
Price on request — quantity, finish and destination determine the quote.
Product Description
Metallic Lines 3D Cement Wall Tile for Entrance — a 20 mm relief tile in 100 × 300 mm modules, 33.3 pcs/m² coverage, 26.6 kg/m² installed. Cast in reinforced fine composite concrete and rated for interior and exterior walls, it ships factory-direct in 24 standard colours, with custom colour casting in 100+ chart shades (RAL / Pantone matching for trade projects). Free samples available.
Project gallery
Angular metallic lines cut across Level in a diagonal rhythm. The 100 × 300 mm module carries a set of angled lines cast into the concrete, and the pattern is named for the way those lines read like folded metal sheet under a hard light. Underneath it all, the tile is still UHPC concrete, warm to the touch and free of any applied metal layer.
Design & Applications
At 33.3 pcs/m² Level gives an entrance a crisp, detailed surface that reads well at close range, which is where visitors actually see it. The lines can be run on the vertical or horizontal so the angular pattern follows the proportion of the wall. A finer ribbed surface, Ribbed Slats 3D wall tile, continues the linear language in a wetter room.
- Entrance hall and foyer walls beside the front door
- Apartment lift lobby and corridor feature walls
- Office entrance reception and wayfinding walls
- Boutique and restaurant entry walls in commercial fit-outs
Specifications
- Module size: 100 × 300 mm
- Thickness: 20 mm
- Coverage: 33.3 pcs/m²
- Weight: 0.8 kg/pc · 26.6 kg/m²
- Material: Reinforced Fine Composite Concrete (UHPC)
- Finish: Angular metallic lines
- Application: Interior / exterior walls
Finishes & Ordering
Level comes in 24 standard colours and is supplied factory-direct. The angular metallic lines are most convincing when the wall is lit from an angle, so a sample laid flat on a table will understate them. Request the physical tile and view it upright before you order.
Custom Colours – Any Shade from Our Colour Chart
Every LANDERY MOSAIC design can be custom-cast in 100+ colours from our studio colour chart: warm neutrals, beige and terracotta (KT series), cool greys (KB), brick reds (KR), ochre yellows (KY), dusty and saturated blues (KS / KA), sage greens (KG), taupe browns (KZ) and burnt oranges (KO). For architects, interior designers and shopfitting teams we offer custom colour matching – send a RAL, Pantone or NCS reference (or a physical sample) and we will cast the Metallic Lines relief in your project colour. Made-to-order production keeps the same reinforced fine composite concrete body and the same relief depth in every shade, so a bespoke colour never compromises the tile.
Standard palette for Metallic Lines (2 finishes in stock) – and any shade from the charts above can be custom-cast:
Frequently Asked Questions
What size are Metallic Lines tiles and how many do I need per square metre?
Each tile in the Metallic Lines 3D Cement Wall Tile range measures 100 × 300 mm and stands 20 mm proud of the wall. Coverage is 33.3 pcs/m², so a 10 m² feature wall needs about 333 tiles. Allow an extra 8–10% for cuts at corners, openings and the end of each run.
How heavy is Metallic Lines once it is on the wall?
One Metallic Lines tile weighs 0.8 kg and a finished square metre weighs 26.6 kg. At this weight the wall has to be sound and mechanically fixed — on stud partitions add bracing or a tile backer board before fixing, and check the substrate before ordering.
Can Metallic Lines be used outdoors, in a bathroom or on a shower wall?
The Metallic Lines 3D Cement Wall Tile is made from Reinforced Fine Composite Concrete (UHPC) and is rated for both interior and exterior walls. In bathrooms and other wet areas, tank the substrate and seal the joints behind the tile, and keep direct shower spray off the relief. For exposed facades, tell us the project location when you enquire so the fixing, sealing and freeze–thaw detail can be specified for that climate.
What colours does Metallic Lines come in, and can I order a sample first?
The Metallic Lines 3D Cement Wall Tile is produced in 24 standard colours: 60T WHITE, 10C BEIGE, 5C GREY, 10C GREY, 30C GREY, 10T GREEN, 30C BEIGE, 30C BLUE, 10G PINK, 5G BRICK, ELEPHANT EAR, CAMEL, LOESS, REDDENED EARTH, MT-SILVER, MT-GOLD, MT-BROWN, MT-COFFEE, MT-BLACK, MT-GREEN, MT-FRUIT-GREEN, MT-WATER-BLUE, MT-D-BLUE and MT-WINE-RED. The same tone reads lighter or deeper depending on how the light rakes across the relief, so order a sample tile before committing to a full wall; samples ship from stock and can be ordered one colour at a time. Need a shade that is not on the list? See the Custom Colours section above – this design can be cast in 100+ chart shades or matched to your own reference.
Can I order Metallic Lines in a custom colour?
Yes. Beyond the standard palette, the Metallic Lines 3D Cement Wall Tile can be cast in any of the 100+ shades on the LANDERY colour chart – beige and terracotta (KT), grey (KB), brick red (KR), ochre yellow (KY), blue (KS / KA), green (KG), taupe (KZ) and orange (KO). For trade and project orders we also do custom color matching to RAL, Pantone or NCS codes – tell us the shade and quantity and we will confirm lead time and arrange a sample in that colour.
How is Metallic Lines installed, and how do I keep the pattern aligned?
Fix with a cement-based tile adhesive on a flat, primed substrate and press each tile firmly into the combed bed. Because the relief is 20 mm deep, set out a dry run first: the pattern only reads correctly when the modules line up, so work from a datum line and check level every few rows. Cut edges with a diamond blade.