点击放大
Stripe Art 3D Cement Wall Tile for Backsplash – LANDERY MOSAIC
Striped art rhythm. Interior / exterior walls.
| Material | Reinforced Fine Composite Concrete (UHPC) |
|---|---|
| Weight | 0.2 kg/pc · 16 kg/m² |
| Surface | Striped art rhythm |
| Application | Interior / exterior walls |
| Collection | Classic Collection 2025 |
100+ custom colours in stock. Send a RAL, Pantone or NCS reference for colour matching.
Price on request — quantity, finish and destination determine the quote.
Product Description
Stripe Art 3D Cement Wall Tile for Backsplash — a 8 mm relief tile in 50 × 250 mm modules, 80 pcs/m² coverage, 16 kg/m² installed. Cast in reinforced fine composite concrete and rated for interior and exterior walls, it ships factory-direct in 24 standard colours, with custom colour casting in 100+ chart shades (RAL / Pantone matching for trade projects). Free samples available.
Project gallery
Biscuit runs a calm horizontal stripe across each 50 × 250 mm piece, a quiet striped art rhythm rather than a hard graphic line. Behind a hob or sink, that restraint lets the stripe art add texture while still reading as a clean, workable surface.
Design & Applications
The long, narrow proportion lets the striped art rhythm be run horizontally for calm repetition or broken into blocks for a bolder effect. It is thin and light, so it suits splash zones that cannot carry much depth. The stripe art is shallow enough to stay flush for practical cleaning while still breaking up reflected light, and because the pieces are light, a large splashback adds almost no weight and can be fixed to many substrates.
- Kitchen backsplashes behind the hob;
- Bathroom vanity splash zones;
- Laundry and utility walls;
- Retail counter fronts and niche linings.
For a wider stripe in the same palette, the Zebra-Crossing 3D wall tile scales the linear idea up considerably.
Specifications
- Module size: 50 × 250 mm
- Thickness: 8 mm
- Coverage: 80 pcs/m²
- Weight: 0.2 kg/pc · 16 kg/m²
- Material: Reinforced Fine Composite Concrete (UHPC)
- Finish: Striped art rhythm
- Application: Interior / exterior walls
Finishes & Ordering
Biscuit is produced factory-direct in 24 standard colours, and because the stripe art is subtle, tonal colourways tend to look best. Order a sample of this striped art tile to check the stripe alignment against your countertop before specifying.
Custom Colours – Any Shade from Our Colour Chart
Every LANDERY MOSAIC design can be custom-cast in 100+ colours from our studio colour chart: warm neutrals, beige and terracotta (KT series), cool greys (KB), brick reds (KR), ochre yellows (KY), dusty and saturated blues (KS / KA), sage greens (KG), taupe browns (KZ) and burnt oranges (KO). For architects, interior designers and shopfitting teams we offer custom colour matching – send a RAL, Pantone or NCS reference (or a physical sample) and we will cast the Stripe Art relief in your project colour. Made-to-order production keeps the same reinforced fine composite concrete body and the same relief depth in every shade, so a bespoke colour never compromises the tile.
Standard palette for Stripe Art (2 finishes in stock) – and any shade from the charts above can be custom-cast:
Frequently Asked Questions
What size are Stripe Art tiles and how many do I need per square metre?
Each tile in the Stripe Art 3D Cement Wall Tile range measures 50 × 250 mm and stands 8 mm proud of the wall. Coverage is 80 pcs/m², so a 10 m² feature wall needs about 800 tiles. Allow an extra 8–10% for cuts at corners, openings and the end of each run.
How heavy is Stripe Art once it is on the wall?
One Stripe Art tile weighs 0.2 kg and a finished square metre weighs 16 kg. That is a light wall load: plastered masonry, tile backer board and a braced stud wall all carry it with a cement-based adhesive, so no special reinforcement is normally needed.
Can Stripe Art be used outdoors, in a bathroom or on a shower wall?
The Stripe Art 3D Cement Wall Tile is made from Reinforced Fine Composite Concrete (UHPC) and is rated for both interior and exterior walls. In bathrooms and other wet areas, tank the substrate and seal the joints behind the tile, and keep direct shower spray off the relief. For exposed facades, tell us the project location when you enquire so the fixing, sealing and freeze–thaw detail can be specified for that climate.
What colours does Stripe Art come in, and can I order a sample first?
The Stripe Art 3D Cement Wall Tile is produced in 24 standard colours: 60T WHITE, 10C BEIGE, 5C GREY, 10C GREY, 30C GREY, 10T GREEN, 30C BEIGE, 30C BLUE, 10G PINK, 5G BRICK, ELEPHANT EAR, CAMEL, LOESS, REDDENED EARTH, MT-SILVER, MT-GOLD, MT-BROWN, MT-COFFEE, MT-BLACK, MT-GREEN, MT-FRUIT-GREEN, MT-WATER-BLUE, MT-D-BLUE and MT-WINE-RED. The same tone reads lighter or deeper depending on how the light rakes across the relief, so order a sample tile before committing to a full wall; samples ship from stock and can be ordered one colour at a time. Need a shade that is not on the list? See the Custom Colours section above – this design can be cast in 100+ chart shades or matched to your own reference.
Can I order Stripe Art in a custom colour?
Yes. Beyond the standard palette, the Stripe Art 3D Cement Wall Tile can be cast in any of the 100+ shades on the LANDERY colour chart – beige and terracotta (KT), grey (KB), brick red (KR), ochre yellow (KY), blue (KS / KA), green (KG), taupe (KZ) and orange (KO). For trade and project orders we also do custom color matching to RAL, Pantone or NCS codes – tell us the shade and quantity and we will confirm lead time and arrange a sample in that colour.
How is Stripe Art installed, and how do I keep the pattern aligned?
Fix with a cement-based tile adhesive on a flat, primed substrate. The 8 mm relief is shallow enough to cut with a diamond blade and fit around sockets and openings, but set out a dry run first so the pattern lines up from the datum line.